FASTENERS FOR FRONT DOOR HANDLES

Adapted for different materials of front doors
One of the main advantages in the market are our high-quality fasteners, which are adapted for different materials and surfaces and with which we ensure the best efficiency.
The stability of the handle depends on the quality of the fastener
Hidden Griffing fasteners affect the stability and rigidity of the door handle.
Durability, strength, and longevity
If fasteners are of lower quality, they can often become loose, which can lead to a wobbly door handle and a customer who is unhappy with the door and its installation. This is why our fasteners are designed with durability, strength, and longevity in mind.
Simple installation and high quality
Griffing fasteners are famous for their simple installation and high-quality stainless steel.

Handle fastener for the highest quality aluminium front door

VRA fasteners are the sturdiest fasteners in the market, developed under our roof for the long-term stability of door handles even with the most used doors. Customers order this premium fastener for aluminium doors of the highest quality.

The highest quality fasteners on the market for inclined handles

VRU fasteners are the highest quality fasteners on the market for 45-degree door handles. The fit of the mount to the fastener is so precise and rigid, that there is practically no play. The load is not on the side screw (as it is with standards fasteners), but on the contact between the fastener and the door handle. The body of the fastener carries the entire weight of the fastener and the side screw is there only to hold the door handle from slipping off the mount when the door is used. This system is more stable and easier to install.

Najkakovostnejše vpetje za poševne ročaje - The highest quality fastener on the market for 45-degree door handles - Griffing

	Other inclined fasteners on the market	Griffing VPU inclined fastener
Well secured and suitable for all materials.	YES	YES
We make no compromises with non-ferrous metals (which may corrode and cause instability). Instead, we select only the best materials and emphasise the use of stainless steel.	NO	YES
Stability does NOT depend only on threaded pins.	NO	YES
Distance between the mounts can be adjusted by 2 mm.	NO	YES
The fit between the fastener and mount is set within precise tolerance (minimal play).	NO	YES
Force distribution during door handle use is spread over the entire surface of the mount not only on the head of a load bearing screw.	NO	YES
Simply adjustable rosette, which increases the stability and minimises mistakes during installation.	NO	YES

Installation instructions for Griffing fasteners

FASTENERS FOR ALU PANELS

ONE-SIDED FASTENERS

VRA vpetje za ALU panele- fastener for ALU panels - Befestigung fuer ALU-Paneele - Griffing

VRA

Premium
90°

Developed in-house for long-lasting stability of handles even on the most heavy front doors.

VRU vpetje za ALU panele- fastener for ALU panels - Befestigung fuer ALU-Paneele - Griffing

VRU

Universal
90°

The screw is not included. Fasten according to your system (lock nut, self-tapping screw, etc.), screws up to M8 are suitable.

VRS vpetje za ALU panele- fastener for ALU panels - Befestigung fuer ALU-Paneele - Griffing

VRS

Self-tapping
90°

TWO-SIDED FASTENERS

VRO vpetje za ALU panele- fastener for ALU panels - Befestigung fuer ALU-Paneele - Griffing

VRO

90°

The type of a VRO fastener depends on the thickness of the door panel:
VRO20 X = 0 – 20 mm
VRO40 X = 21 – 40 mm
VRO60 X = 41 – 60 mm
VRO80 X = 61 – 80mm
VRO100 X = 81 – 100 mm
VRO120 X = 101 – 120 mm

FASTENERS FOR ALU PROFILES

ONE-SIDED FASTENERS

VRA

Premium
90°

Developed in-house for long-lasting stability of handles even on the most heavy front doors.

VRU

Universal
90°

The screw is not included. Fasten according to your system (lock nut, self-tapping screw, etc.), screws up to M8 are suitable.

VRS

Self-tapping
90°

VPU

Universal
35° in 45°

The highest quality fastener on the market for inclined door handles.

VPA

Premium
35° in 45°

TWO-SIDED FASTENERS

VRO

90°

VPO

35° in 45°

The type of a VPO fastener depends on the thickness of the door panel:
VPO40 X = 24 – 40 mm
VPO60 X = 41 – 60 mm
VPO80 X = 61 – 80 mm
VPO100 X = 81 – 100 mm
VPO120 X = 101 – 120 mm

FASTENERS FOR PVC PROFILES

ONE-SIDED FASTENERS

VRU

Universal
90°

The screw is not included. Fasten according to your system (lock nut, self-tapping screw, etc.), screws up to M8 are suitable.

VPU

Universal
35° in 45°

The highest quality fastener on the market for inclined door handles.

TWO-SIDED FASTENERS

VRO

90°

VPO

35° in 45°

The type of a VPO fastener depends on the thickness of the door panel:
VPO40 X = 24 – 40 mm
VPO60 X = 41 – 60 mm
VPO80 X = 61 – 80 mm
VPO100 X = 81 – 100 mm
VPO120 X = 101 – 120 mm

FASTENERS FOR WOODEN PANELS

ONE-SIDED FASTENERS

VRU vpetje za lesene panele- fastener for wooden panels - Befestigung fuer Holz-Paneele - Griffing

VRU

Universal
90°

The screw is not included. Fasten according to your system (lock nut, self-tapping screw, etc.), screws up to M8 are suitable.

VPU vpetje za lesene panele- fastener for wooden panels - Befestigung fuer Holz-Paneele - Griffing

VPU

Universal
35° in 45°

The highest quality fastener on the market for inclined door handles.

TWO-SIDED FASTENERS

VRO vpetje za lesene panele- fastener for wooden panels - Befestigung fuer Holz-Paneele - Griffing

VRO

90°

VPO vpetje za lesene panele- fastener for wooden panels - Befestigung fuer Holz-Paneele - Griffing

VPO

35° in 45°

The type of a VPO fastener depends on the thickness of the door panel:
VPO40 X = 24 – 40 mm
VPO60 X = 41 – 60 mm
VPO80 X = 61 – 80 mm
VPO100 X = 81 – 100 mm
VPO120 X = 101 – 120 mm

FASTENERS FOR A COMBINATION OF GLASS AND ALU PANELS

ONE-SIDED FASTENERS

VRUS

Universal
90°

The screw is not included. Fasten according to your system (lock nut, self-tapping screw, etc.), screws up to M8 are suitable.

VRMS

Premium
90°

VRSS

Self-tapping
90°

TWO-SIDED FASTENERS

VROS

90°

The type of a VROS fastener depends on the thickness of the door panel:
VROS20 X = 0 – 20 mm
VROS40 X = 21 – 40 mm
VROS60 X = 41 – 60 mm
VROS80 X = 61 – 80mm
VROS100 X = 81 – 100 mm
VROS120 X = 101 – 120 mm

CHARACTERISTICS OF GRIFFING FASTENERS

SPACE FOR AN EXPANSION NUT

Washers are also suitable for installation with expansion nuts.

PLASTIC AND RUBBER WASHERS FOR GLASS DOORS

Protective washers mitigate the transmission of vibrations and thus prevent the breakage of glass.

Installation instructions for Griffing fasteners