fbpx
12

ROSETTES FOR THE HANDLE MOUNT

  • Two models for only round handle mounts

    We offer two rosette models for 90° and 45° door handles with round mounts. Rosettes are only suitable for handles with round mounts.

  • Greater stability of door handle

    Rosettes ensure greater stability, as the contact area of the door handle with the door increases.

  • A great visual addition

    In addition to increased stability of the handle, the rosettes are a great visual addition.

  • Innovative way of adjusting and tightening

    The rosette for 45° door handles is an upgrade to the excellent VPU fastener. These rosette differs from others due to its innovative way of adjusting and tightening.

How to install the rosette for 45° round mounts for the perfect alignment with the handle

1. Place the rosette on the front door panel and slightly tighten the fasteners. The rosette must still move freely.

2. Take the handle with already installed mounts and turn it so that the ends of the mounts fit the groove in rosettes. Aligh rosettes on both sides. 

3. Tighten the rosettes fully with imbus key. 

4. Lift the handle, turn it correctly and place it on fasteners. Tighten the thread pin with imbus key. 

The way the rosette is adjusted and tightened is entirely the result of our company’s development. 

Primer napačno montirane rozete za okrogle nosilce ročajev za vhodna vrata in primer pravilno montirane rozete - Griffing

TWO MODELS OF ROSETTES FOR HANDLE MOUNT

ON90PRA

Rosette for 90° handles with round mounts

Rosette for the handle mount - 90 degree - Griffing

ON45PPU

Rosette for 45° handles with round mounts

Rosette for the handle mount - 45 degree - Griffing
See our range of handles for front doors