The configurator lists the technical characteristics in order, and these are used to create the final code. It is created by opening the configurator and following the order when transcribing the codes of different parts:

• STYLE: Square shape.
• MOUNTS: Seven types of mounts can be used with the Prime Line Bold. For a vertical mount, the possible choices are KN90 (90° square mount), ON90 (90° round mount), ON90PRA (90° round mount with a premium rosette), and CPO90 (90° mount, which supports a fingerprint scanner CPO and LED lights); and the possible choices for an angular mounts are KN45, CPO45D (45° right mount, which supports a fingerprint scanner and LED lights), and CPO45L (45° left mount, which supports a fingerprint scanner and LED lights).
• MEASUREMENTS: Eight standard measurements are available (600 mm to 2000 mm), but customised measurements are also possible.
• FASTENERS: Then one of the fasteners based on the material is chosen. Only VRU, VRO, VPU and VPO fasteners are possible with a PVC panels. The configurator legend below the fasteners shows, which fastener is most suitable for a specific material. In case of two-sided fasteners (VRO, VPO), a suitable fastener length based on the thickness of the door panel (40 / 60 / 80 / 100 mm) must also be chosen.
• FINGERPRINT SCANNER: To add a fingerprint scanner, the position of the scanner and the name of the manufacturer (ekey dLine, Navkom R7 or other manufacturer) must be included in the code. Navkom fingerprint scanner can be mounted on the front (CF) or back side (CB), while ekey dLine can be mounted only on the front side (CF).
• LIGHTING: To add an LED strip, the abbreviation ‘LED’ must be added. You can choose from 12 V or 24 V power supply.
• FINISHES: An aesthetic finish (Z03) can be added at the top or the bottom of the handle.
• SURFACE: The universal standard treatment is matte; special codes must be added to choose a polished finish (SP), powder coating in black (SB) or powder coating in other RAL colours (SRAL).

The code of a Prime Line Bold front door handle per our latest catalogue would look like this: GKV-CPO90-L2000-VRO60-CF-EKEY-LED-SRAL5015, which means a square handle with a 90° mount with a fingerprint scanner CPO, a handle length of 2000 mm, a VRO fastener for 60 mm door thickness, an ekey fingerprint scanner on the front side, LEDs and powder coated surface treatment in RAL colour 5015.

If the door handle is without additions, the code can be very simple. For example: GKV-KN90-L1800-VRU stands for a square handle with a square 90° mount, a handle length of 1800 mm and a VRU fastener.